250~700mA Multi-current LED Driver(2×25W) with 1-10V & Switch Dimming Function

250~700mA Multi-current LED Driver(2×25W) with 1-10V & Switch Dimming Function

Model No.︰HE1050-A

Brand Name︰HYTRONIK

Country of Origin︰China

Unit Price︰-

Minimum Order︰10 pc

Inquire Now

Product Description

Dimmable multi-current LED driver -- HE1050-A

LED current selection:
 This multi-current LED driver has covered the normal curren in the market. The current can be easily configured by choosing the correct combination of the DIP switches.  Warning: please make sure the correct current is selected before switching on the driver!!! (Over-current may cause serious damage to the LED, while under-current does not give the full light output of the LED.)

Extended RF dimming function: 
An extended interface to our 1-10v dimming terminal. This extended dimming function is very convenient for RF and Zigbee dimming with external RF or Zigbeem odule. The external RF/Zigbee module is an user friendly design: Plug and Play. 

PWM dimming: 
PWM dimming is available upon customer's request, it is easily and quickly achievable by minor adjustment on the PCB layout and output terminal. 

Switch-Dim:

  •  On/off: Short push(50-400ms) on the switch.
  •  Stepless dimming: Long push and hold ( > 400ms) on the switch.
  •  For fine tuning of light level: With every 2nd long push,the light level goes the opposite direction.
  • Built in with permanent memory: Light returns to the previous dimming level when switched off and on again, even at power failure.

Detailed Data Sheet:        

       
Input voltage 220-240VAC  50/60Hz
Rated current                        0.25A (Max)
Rated power  2×28W (MAX)
Output voltage 60VDC (Max)
Operation frequency  320kHz f50kHz
Powor factor  0.90
Operation temperature Ta: 50     Tc: 75
Output current & Load  250mA(1-16pcs)  350mA(1-16pcs) 
400mA(1-16pcs)  450mA(1-13pcs) 
500mA(1-12pcs)  650mA(1-11pcs) 
600mA(1-10pcs)  700mA(1-10pcs)
Max. Efficiency 86%
Abnormal protection Output short-circuit protection with auto-reset      
Over-heat protection Over-heat protection with auto-reset      
EMC standard EN56015 EN61547 
Safety standard  EN61347-1 EN61347-2-13 
Certification CE SEMKO EMC
Dielectric strength  Input—Output: 3750VAC 
Input—Ground: 1800VAC 
Output—Ground: 500VAC 
All with 5mA/1min 
Ip grade IP20 built-in type

Price Terms︰ FOB Guangzhou

Payment Terms︰ TT/PAYPAL

Packing︰ CTN

Lead Time︰ 5~7 Working days

SKU︰ 1000

Standards Certificate︰ CE SEMKO EMC

P.S.︰ If not sure about anything on this page then why not ask us a question?

Product Image