250~700mA Multi-current LED Driver(1×30W) with 1-10V & Switch Dimming

250~700mA Multi-current LED Driver(1×30W) with 1-10V & Switch Dimming Function

Model No.︰HE1030-A

Brand Name︰HYTRONIK

Country of Origin︰China

Unit Price︰-

Minimum Order︰10 pc

Inquire Now

Product Description

Dimmable multi-current LED driver -- HE1030-A

LED current selection:

This multi-current LED driver has covered the normal curren in the market. The current can be easily configured by choosing the correct combination of the DIP switches.

Warning: please make sure the correct current is selected before switching on the driver!!! (Over-current may cause serious damage to the LED, while under-current does not give the full light output of the LED.)

Extended RF dimming function:

An extended interface to our 1-10v dimming terminal. This extended dimming function is very convenient for RF

and Zigbee dimming with external RF or Zigbeem odule.

The external RF/Zigbee module is an user friendly design: Plug and Play.

PWM dimming:

PWM dimming is available upon customer's request, it is easily and quickly achievable by minor adjustment

on the PCB layout and output terminal.

Switch-Dim:

On/off: Short push(50-400ms) on the switch.
Stepless dimming: Long push and hold ( > 400ms) on the switch.
For fine tuning of light level: With every 2nd long push,the light level goes the opposite direction.
Built in with permanent memory: Light returns to the previous dimming level when switched off and on again, even at power failure.

Detailed Data Sheet:

Input voltage	220-240VAC 50/60Hz
Rated current	0.25A (Max)
Rated power	36W (MAX)
Output voltage	60VDC (Max)
Operation frequency	320kHz ≥f≥50kHz
Powor factor	≥0.90
Operation temperature	Ta: 50℃ Tc: 75℃
Output current & Load	250mA(1-16pcs) 350mA(1-16pcs) 400mA(1-16pcs) 450mA(1-13pcs) 500mA(1-12pcs) 650mA(1-11pcs) 600mA(1-10pcs) 700mA(1-10pcs)
Max. Efficiency	≥86%
Abnormal protection	Output short-circuit protection with auto-reset
Over-heat protection	Over-heat protection with auto-reset
EMC standard	EN56015 EN61547
Safety standard	EN61347-1 EN61347-2-13
Certification	CE SEMKO EMC
Dielectric strength	Input—Output: 3750VAC Input—Ground: 1800VAC Output—Ground: 500VAC All with 5mA/1min
Ip grade	IP20 built-in type

Price Terms︰ FOB Guangzhou

Payment Terms︰ TT/PAYPAL

Packing︰ CTN

Lead Time︰ 5~7 working days

SKU︰ 1000

Standards Certificate︰ CE SEMKO EMC

P.S.︰ If not sure about anything on this page then why not ask us a question?

250~700mA Multi-current LED Driver(1×30W) with 1-10V & Switch Dimming Function

Product Description

Product Image